Do you know what a deckchair, a bumper, a fruit recollection box or a garbage container have in common?

They are plastic parts injected with large moulds.

Back in 1992, Dicomol decided to start a new era at Montcada's industrial park, and PIMEG's crane bridges were exactly what we were looking for, so they became our partner, and they provided all the different crane bridges necessary for what we needed back then.

The design and construction process of a new mold varies according to the type of mold: injection, thermoforming, blowing, etc.

Also, depending on the size and design of the part, manufacturing can take anywhere from 4 to 30 weeks.

We share the development of an injection mold in PEHD material, for internal engine parts, showing the different phases of the process.

You could find the NEW & Updated certification ISO9001:2015. DICOMOL, a company established on 1979, we has the ISO certification since 1999. Now, we renew for 3 additional years, under the last release of the regulation, dated on 2015.

Dicomol obtains support from financing funds for reindustrialization, through the Ministry of Industry: "Investment project for improvements and expansion of production processes for repair, preparation, maintenance and design of plastic injection molds".

On January 13, the Minister of Business and Knowledge, Mr. Ramón Tremosa, together with the Mayor of La Llagosta Mr. Oscar Sierra, visited our new facilities.

As result of the strategical lines from DICOMOL (Clinic of the Moulds) are developing, the INTEREMPRESAS group propossed us to share them in the publication of the MOLDES magazine.

Since this week, and continuous the strategical growth plan outlined since years ago, DICOMOL (#ClinicaDelMolde) increases its capacities through the incorporation of the Production Unit of MOLDES BARCELONA.

For years we have been convinced of the need to carry out an expansion and / or change our facilities.

"The Board of Directors of DICOMOL has decided to appoint Estela Sanchez Aparicio as General Director."

On March 30, 2020, we received a challenge! We needed to have a mold in less than 15 days, to manufacture the protective mask visors support. Do you want to know how we did it?

Most of our customers known very well what they are expecting in the technical point of view for their injection tool. To that end they normally send us their tool standard and dedicated project specifications in order to have a precise quote from us.